Category: Uncategorized
A BATTERY MOOCH POST: Vapcell H10 – 10A 1000mAh 14500…slightly overrated capacity
This is a decent 10A cell but I recommend staying under 7A/20W for better performance and less voltage sag.
The capacity for the two Vapcells I tested was 957mAh and 958mAh at 200mA (0.2C) down to 2.5V. This is incredible consistency but these cells fail to meet their 1000mAh rating. I am rating them at 900mAh.
Ratings graphic: https://imgur.com/a/vB5aD16
Full Test report: https://bit.ly/3bxwFq0
I want to work for the vaping community full time! If you feel what I do is worth a couple dollars a month and you would like early access to battery availability, battery and charger testing and news, and a say in what I test, then please consider becoming a patron and supporting my testing efforts: https://www.patreon.com/batterymooch.
These tests only note the ESTIMATED ratings for these batteries at the time I tested them. Any battery that is not a genuine Samsung, Sony, Murata, LG, Panasonic, Molicel, or Sanyo can change at any time! This is one of the hazards of using “rewrapped” batteries or batteries from other manufacturers so carefully research any battery you are considering using before purchasing.
Misusing or mishandling lithium-ion batteries can pose a SERIOUS RISK of personal injury or property damage. They are not meant to be used outside of a protected battery pack and you use them AT YOUR OWN RISK. Never exceed the battery’s continuous current rating and keep the plastic wrap and top insulating ring in perfect condition.
Any rating in my ratings tables can change at any time as different grade cells appear on the market, we get swamped with fakes, or new information becomes available to me. Please, never assume that the ratings in the tables are permanent and will never change! Always download the latest version before considering any cell purchase.
To see how other cells have tested check out this link: https://www.e-cigarette-forum.com/forum/blog-entry/list-of-battery-tests.7436/
AND THE TRUTH SHALL SET YOU FREE – WELL, NOT REALLY
So the FDA has finally come clean on the real issue. We’ve known it all along, but now they are admitting it. Illicit tainted THC cartridges. Yes my friends, drug dealers have taken down the industry, not only in America, but all over the world.
But life is good right? I mean, with something like this from the FDA, we should be in the clear…
Statement on consumer warning to stop using THC vaping products amid ongoing investigation into lung illnesses
This is why today, we’re strengthening our message to the public in an updated consumer alert stating that they should not use vaping products containing tetrahydrocannabinol (THC), the primary psychoactive component of the cannabis plant. Additionally, consumers who choose to use any vaping products should not modify or add any substances such as THC or other oils to products purchased in stores and should not purchase any vaping products, including those containing THC, off the street or from other illicit channels.
You can read their entire release HERE.
No, I don’t think so. The damage is done. Businesses continue to suffer. Businesses continue to close. Sales are down, not only in America, but all over the world as we’ve very clearly heard when we were in Greece, and now in France.
The fights against the bans need to continue. The calls into the White House and our representatives need to continue. The Twitter war must continue.
Right now, one of the most important things this industry can do is to come together and create a positive PR campaign for vaping. As I said, the damage is done, and it’s going to take a long time, a lot of work, and a lot of money to regain consumer confidence in vaping. We know how good it is. The rest of the world needs to know it as well.
FROM TONY ABBOUD/VTA – Federal Update on Cole-Bishop from VTA
Federal Update on Cole-Bishop from VTA:
On April 30, 2017, at about 9:00 p.m. eastern, House and Senate leaders reached a deal to fund the government for the next five months. Though the bill averted a government shutdown, it did not include the Cole-Bishop Amendment, which has been the vapor industry’s top legislative priority. Our intelligence tells us that while Cole-Bishop was not included, this first major attempt to incorporate bipartisan legislation in support of the industry in a major budget bill was hugely impactful. In fact, unlike previous efforts, the ultimate decision came down to just a few senators.
While we are exceptionally grateful for each of those Members of Congress who spoke up for small businesses and the vapor industry, we are particularly grateful for each vapor company, large and small, who aggressively pushed the agenda and who encouraged others to write and call their elected officials.
And, while this particular outcome is disappointing, our resolve to save vapor is strong because we have only set the stage for future success. The current budget deal runs for only 5 months. During that time, we will continue to press for a Congressional solution.
As you know, the multi-pronged plan we laid out at the beginning of 2017 included both Congressional and Administration activities. In that regard, VTA already has commenced its strategies to seek relief from the Trump Administration. Just last week, VTA leadership met with Secretary Price’s senior leadership team to make the case for that relief. In the coming months, we will be moving forward on dual paths in Congress and the Administration.
This Tuesday, two members of our bi-partisan government affairs team will join us for a national webinar to provide an update on where things stand in Washington, D.C. for the vapor industry. We highly encourage you to click here to register and get the play-by-play on what went down this week and where we are heading: https://attendee.gotowebinar.com/regist…/4892709478153348611
And, thank you for all you do to defend vapor!
CONGRATS KENNY!!
Congratulations to Kenny!! He knew that “Dimitri Pink” device was a Sigelei and won himself an Innokin Prize Pack in a recent “Not A” Contest! Happy Happy my friend!
A MESSAGE FROM TONY ABBOUD – VTA MARKETING WEBINAR – SIGN UP TODAY!
YOU’RE INVITED! JOIN US!!
In our continuing effort to inform and educate retailers and manufacturers on important regulatory issues, we are pleased to announce the next installment of
VTA’s Compliance Webinar Series:Marketing: Real Guidance for Navigating
FDA and State Laws
on the Marketing and Sale of ENDS ProductsPresented by:Chris HowardVice President, General Counsel, and Chief Compliance OfficerE-Alternative Solutions, Inc.DATE/TIME:MONDAY, APRIL 3, 2017
1:00 p.m. (eastern) / 12:00 p.m. (central) / 10:00 a.m. (pacific)After registering, you will receive a confirmation e-mail
containing information about joining the webinar.
Webinar Summary: Marketing and promoting e-vapor products continues to get more complicated. The FDA has included specific requirements in the Deeming Regulation, and states and localities have not shown any hint of slowing down with respect to the implementation of their own rules and regulations. Topics to be covered include rules for marketing ENDS products set forth in the Deeming Rule, recent guidance issued by FDA regarding permissible forms of promotion and the prohibition of distributing free samples of ENDS products, and best practices for managing variability of federal, state and local laws.
THE PHALANX DUNK TEST, PROGRESS AT THE NEW MOLECULE LABS FACILITY, THE ARYMI ARMOR KIT REVIEW & THE LAST CONTEST WINNER!
A PBusardo Review – The Arymi Armor Starter Kit
In this video we do the DNA “Dunk Test” on the Phalanx, see the progress at the new Molecule Labs facility, review the Arymi Armor Kit, talk about the required changes to the contests, and FINALLY announce the last contest winner!
The Links:
Vape Chalet
Molecule Labs
Arymi
My Vapor Store
Vape Chemist
The Video:
*NOTE: Any use of these videos in part or in their entirety without Phil Busardo’s expressed written consent is strictly prohibited.
The Photos:
NEW IN THE QUEUE – THE KANGER CUPTI 2 – 8/11/16
- This product has been received in exchange for promotion and/or review. It was received prior to 8/8/16.
Here’s the Cupti 2, the bigger brother of the Cupti.
This is another internal tank device, similar to the original Cupti. It has the body shape of the Drip Box 160 (Reuleaux), uses two 18650 batteries, fires up to 80W, does temp control for Nickel 200, Titanium and Stainless Steel and is firmware upgradeable. As a matter of fact, they’re already hinting at a 80W to 100W upgrade.
Although it’s substantially larger than the Cupti, we don’t gain any additional tank capacity, it has the same 5ml tank as seen in the Cupti 1.
I like the fact that this one comes with an adapter that will turn it into a standard 510 device. We didn’t see that with the original Cupti.
Regarding the big M you’re gonna see on the screen. I’ll figure that out when I get to it. 🙂
Here’s some additional information from Kanger:
The Kanger CUPTI 2 is an All-In-One device that is designed for both mouth to lung and direct lung vapers. The Kanger CUPTI 2 features a large 5.0ml built-in tank that utilizes the leak resistant cup design to help minimize leaks. The Kanger CUPTI 2 can fire up to 80 watts and supports Nickel 200, Titanium and Stainless Steel atomizers in temperature control mode. The Kangertech CUPTI 2 supports the CLOCC atomizer heads and includes (1) SS316L 0.5ohm atomizer head for direct lung users. The Kanger CUPTI also features an adjustable airflow valve located right under the mouth piece for maximum airflow.
The included 510 tank adapter allows you to use your favorite tank or dripper with the CUPTI 2. The Kanger CUPTI requires 2 high amp 18650 batteries (sold separately) and is easily replaced using the bottom battery door which is easily locked and unlocked. The CUPTI 2 has a micro USB port for charging and future firmware updates. All you require is batteries and e-Liquid and you are ready to start vaping!
Features and Specs:
- Dimensions: 4-1/8″ x 2″ x 1-5/8″
- All in One Design
- Includes 510 Tank Adapter
- Temperature Control for Nickel 200, Titanium and Stainless Steel
- 5.0ml Capacity
- Operating Wattage: 5.0 – 80.0 W
- Temperature Range: 100 – 315C / 200-600F
- Resistance Range: 0.1 – 2.5ohm
- Top Adjustable Airflow Valve
- Leak Resistant Cup Design
- OLED Display Screen
- Durable Surface Finish
- Zinc and Aluminum Alloy Construction
- 510 Drip Tip Compatible
- Micro USB Charging Port
- Firmware Upgradeable
- Utilizes (2) High Amp 18650 Batteries (Sold Separately)
- Utilizes Kanger CLOCC Atomizer Heads
- Includes 1 x CLOCC SUS316L 0.5ohm Atomizer Head (Pre-Installed) for Direct Lung Users
- Supports Optional CLRBA Rebuildable Atomizer (Sold Separately)
NEW IN THE QUEUE – THE VOLCANO LAVABOX 75 – 8/11/16
- This product has been received in exchange for promotion and/or review. It was received prior to 8/8/16.
The Volcano Lavabox 200 get’s a baby brother with the Lavabox 75. Since I just looked at the DNA-75 (the board in this devicde), this will be part of a DNA-75 device comparison. Happy the fire button juts out a bit now. 😉
It’s available in black and “blood red” for $99.99 from their site.
Here’s some additional information from Volcano:
LESS IS MORE.
The new body design makes the LAVABOX M 20% smaller than the DNA 200 version. Measuring in at 26.6mm x 85mm x 43.8mm.
POWER OF ATTRACTION.
The LAVBOX M features a new magnetized removable battery door which is built into the rubberized grip. The body of the device has been machined with a unique angled design, which provides easy access to the 18650 battery cell.
LOCKED AND LOADED.
To create the most secure connection between your device, the LAVABOX M is equipped with a spring loaded and plated 510 connection which accepts a wide range of atomizers.
GET A GRIP.
Find the perfect color matching grip for your LAVABOX M. Accessorize with ease. The new rubberized grips snap on and off the body with magnets.
FACETIME.
The OLED display is hidden under the devices smoked out plastic screen cover for a sleek look. When the device is powered off the high-gloss cover blacks out the entire front of the device. When powered on, the display shines through.
INNOKIN ANNOUCES THE TC-18650 FOR THOSE WHO WANT A REPLACEABLE BATTERY
From Innokin:
Vapers have demanded it and we’ve listened! The Innokin CoolFire4 TC18650 75Watt Vaporizer with a replaceable 18650 battery is now available for order!
Powered by the ultra-fast and accurate AETHON temperature control board, the new CoolFire4 TC18650 runs on a single 18650 battery and delivers 75Watt with temperature control! The CoolFire4 TC18650 is compact, durable and ultra-fast at 0.2 seconds from Click to Vape!
The CoolFire4 TC18650 easily calibrates SS316L, Ni200, and Titanium coils for precise temperature control as well as Wattage mode output.
The CoolFire4 TC18650 is available in two editions: the Complete Kit which includes an iSubV Tank and a protective silicon 18650 battery cover and a Limited Edition Vape Travel Kit (without iSub V tank) which includes an added Vape Travel Case with an integrated 18650 Battery power level checker.
Complete kit is available in three colors: Black and Silver (brushed metal), and pure White.
Limited Edition Vape Travel Kit is available in four durable finishes (brushed metal): Black, Silver, Blue and Red.
The CoolFire4 TC18650 is available to order today!
Contact your friendly Innokin Sales representative or email sales@innokin.com for more information.
Store
